Type 2 Water Purification System

Prima Series

Highlights:

  • Three Stage pre-filteration setup of 10µ/5µ/1µ/0.5µ/iron filter, activated carbon to protect and enhance the life of the precious cartridges.
  • Low initial investment while buying the water purification system.
  • High flux thin film composite (TFC) polyamide RO membranes.
  • EDI’s continuous self regeneration process improves water quality.

Specifications:

Models Prima-2/3/4/6/10/15/20/25/30/35/40/50 Prima EDI-2/3/4/6/10/15/20/25/30/35/40/50
Display 5.7” TFT /LED/LCDGraphic Display 5.7” TFT /LED/LCDGraphic Display
Product Flow Rate 2/3/4/6/10/15/20/25/30/35/40/50L/Hr 2/3/4/6/10/15/20/25/30/35/40/50L/Hr
Product Water Resistivity (at 25°C) 10-15 Mohm.cm 10-15 Mohm.cm
Conductivity 0.1-0.06 µS/cm 0.1-0.06 µS/cm
Cell Constant (K) 0.01/0.1/1.0 0.01/0.1/1.0
Ionic & Organic Rejection/Removal >99% >99%
Silicate Rejection >99.9% >99.9%
Bacterial Count (cfu/10ml<1) <0.1cfu/ml <0.1cfu/ml
On line UV Absorbance 254nm 254nm
TOC <20ppb* <20ppb*
Temperature Compensation 0-100°C 0-100°C
Deionization Mixed Bed Resins Based Continuous self Regeneration Electrodeionzation Based

*only if online UV in the system and feed water TOC <250ppb
* 1-2ppb with dual UV,pH:7/Neutral with online measurement,Turbidity in NTU of Pure Water<0.04

Lab Q-II Series

Highlights:

  • Better substitute to Quartz/ Glass Single/ Double** Distillation Apparatus, TDS is zero.
  • Easy quick fit connectors to exchange filter/module of the water purification system.
  • Very Low Electricity consumption as compared to conventional distillation apparatus, low maintenance.
  • Saves potable water from tap up to100L/hr VS distillation units.
  • High recovery rate>30% of double RO Pass
  • No Scaling problem as compared to Distillation.
  • Saves Water as compared to conventional distillation method.
  • Rapid and simple disinfection.

Specifications:

Water Purification System Model: LabQ-II Series
Display 16×4 Character LCD
Resistivity >10 Mohm.cm at 25°C
Conductivity < 0.1µS/cm
Ionic Rejection > 98%
Inorganics&Particulates Rejection > 99%
TOC (ppb) <30ppb*
Bacteria/Microbial Particles <50cfu/ml)
Flow Rate/Auto dispense Rate 5/10/15/20 Ltr/Hr
Product Water Grade Type II**
Product Water Monitoring Yes
% RO Rejection Yes
Auto Flushing with Customized TimesYes Yes
Feed Water Monitoring Yes
Cell Constant (K) 0.1/0.01
Temperature Compensation 0 to 100°C
Low/ High Feed Water Protection Yes
Tank Yes
Prefiltration Three Stage
Datalogging Yes

* Feed Water TOC <250ppb

* Depends upon feed water conductivity <300µS/cm

Content missing

Scroll to Top

Enquire Now